Steel Pipes by Types » Type M

Available in sizes from 2 1/2" to 12", Type M copper plumbing tubes are used in applications where water conditions are suitable for low-pressure plumbing. This type of tubes is also used in low-pressure steam and hot-water heating systems. In 3/4" size, the bursting pressure of Type K tubes is 3,000 pounds per square inch.

Type M tubes are relatively thin-walled and are generally suitable for condensate and other drains. These tubes are not advised for uses in pressure applications.

Product	Temper	Lengths	Code	Specifications
Copper Plumbing Tube (Heavy Wall) Rectangular Wire Rods	Hard	10 Ft. Straight
		20 Ft. Straight
	Soft	20 Ft. Straight	Green	ASTM B88
		40 Ft. Coils
		60 Ft. Coils
		100 Ft. Coils

Applications:

• General Plumbing and Heating Purposes
• Drainage Waste
• Vent
• Other Low Pressure Uses